When a new TN1070 toner is installed in a Brother MFC1810 and MFC1910W printer, a reset gear should turn and trigger a switch to reset the toner counter.
Sometimes the toner counter doesn’t get reset and realigning the reset gear is a little bit too techy for most users.
The following should reset the toner message for these printers:
- Press the MENU button.
- Hit the down arrow until you see info on the display.
- Press the OK button.
- Hit the down arrow until you see reset drum.
- Press and hold the OK button until you see reset on the display.
- Press *, 1, 1.
- You should now see accepted on the display.
- Turn off the printer.
- Turn on the printer.
The toner message should now be reset.
Please leave a comment if you find this guide useful or there is anything I can add to it to make it easier to follow.
printer busy, cannot reset
The printer will not reset when is busy (you may need to clear jobs from the printer and restart it).
Yeah, it work for me
Thanks for the knowledge
♥️💝💖
It worked for me.
Thanks.