If you have an old Kyocera Ecosys FS1000, FS1000+, FS1010 or FS1010+ that does not print in the right position on the page, you could have sticky registration or feed solenoids. This is an easy -ish fix that requires a small amount of tech skill and a number 2 Phillips screw driver. First check the…
Cartridge alignment problems and fuzzy print are common faults with the HP Colour LaserJet CP2020, CM2320fxi, CP2025dn, CP2025x, CM2320n, CM2320nf and CP2025n series (and any other Hewlett Packard colour printer that takes the CC530A, CC531A, CC532A and CC533A cartridges. There are a few different causes of this problem: Faulty or worn toner cartridges. To calibrate or…
A common problem with the HP1600, HP2600 and Canon LBP5000 series colour printers is cartridge alignment errors. Note: Fig.1 There are a few different things that cause this problem: Dirty laser unit. Fix can be found here. Faulty cartridges. This causes the calibration patches to be miss-read. Transfer belt and sensors. Dirt/paper dust build up on…