Printer tips and tricks e.g. how to reset various toner/drum/fuser messages, how to extend the life of your toner cartridges, how to clean your printer etc.
Open the front cover that gives you access to the toners. Press and hold the “Secure Print” and “Cancel” buttons at the same time. You will see “K-TNR-STD” displayed on the screen (if not displayed, see Note 2 below). Using the “+” and “-” buttons select the toner you want to reset. Press the “Ok”…
Brother HL-2040: If the low toner indicator fails to reset even though the cartridge has been replaced… Open the front cover and leave open while completing the following steps: Turn the printer off and hold the ‘go’ button while turning the printer on. Release the ‘go’ button after the three lights are lit. Press the ‘go’…
Try this for extending the life of your TN150 or TN155 toner cartridges when you get the Brother MFC 9440CN Toner Life End Message… 1. With the power on, open the toner access main door (you will get a “door open” message in the LCD). 2. Hit the “Clear/Back” button and you go to the…
How to reset the toner light on HL-2150N and similar machines: Turn the printer off and open the front cover. Leave it open while completing the following steps: 1. Hold the “GO” button while turning the printer on. 2. All panel lights should now be on. Release the “GO” button. 3. Press the “GO” button…
Ink is formulated to dry quickly when it hits the paper. Unfortunately it sometimes tends to dry in the nozzles of the printhead. It’s recommended to leave your ink jet printer switched on because some printers run a small amount of ink through the printhead at timed intervals to keep the nozzles in good shape. It’s…