FS1010

Kyocera FS1010 Printing Off The Page- How To Fix

Posted on by Easyink Support

If you have an old Kyocera Ecosys FS1000, FS1000+, FS1010 or FS1010+ that does not print in the right position on the page, you could have sticky registration or feed solenoids. This is an easy -ish fix that requires a small amount of tech skill and a number 2 Phillips screw driver. First check the…

Kyocera FS-1010 dirty print – How to fix

Posted on by Easyink Support

Hi If you have a Kyocera Ecosys FS1000, Ecosys FS-1000+, Ecosys FS1010 or Ecosys FS-1010+ laser print that has dirty prints like the sample shown below you have a worn/old drum cleaning blade. To fix this fault you will need to replace the blade with a new one. You may also note that the printing…